ERW/LSAW Welded Steel Pipe  

Kout Deskripsyon:

1.Straight Seam steel pipe:straight pipe joints are parallel to the longitudinal welds and steel pipe. Usually divided into metric welded steel pipe, welded thin-walled tube, transformer cooling tubing etc.; 2.Materails: 20#, Q345B, GR.B, X42, X56, P11, P22, ST37, ST45.8, ST52, S235JR, S355JR, STP430; 3. Standard: GB/T8162, GB/T8163, API 5L, A106, A53, A335, A333, DIN1629, DIN2448, NF A49, GOST8731, JIS,G3454; 4. Specification: Outer diameter: 1/4”-32” (13.7mm-762mm); Wall thickness: 1.5mm-...


  • FOB Prix: US $ 0.5 - 9,999 / pyès
  • Min.Order Kantite: 100 Moso / Moso
  • Abilite Pwovizyon pou: 10000 Moso / Moso pou chak mwa
  • Port: Hebei Lachin
  • Peman Regleman: L / C, D / A, D / P, T / T
  • pwodwi Detay

    done teknik

    pwodiksyon

    Pake

    pwodwi baj

    1.Straight Seam steel pipe:straight pipe joints are parallel to the longitudinal welds and steel pipe. Usually divided into metric welded steel pipe, welded thin-walled tube, transformer cooling tubing etc.;

    2.Materails: 20#, Q345B, GR.B, X42, X56, P11, P22, ST37, ST45.8, ST52, S235JR, S355JR, STP430;

    3. Standard: GB/T8162, GB/T8163, API 5L, A106, A53, A335, A333, DIN1629, DIN2448, NF A49, GOST8731, JIS,G3454;

    4. Spesifikasyon:
    Outer diameter: 1/4”-32” (13.7mm-762mm);
    Wall thickness: 1.5mm-80mm;
    Length: 2m- 12m;

    5. End: Plain end, beveled end, thread, coupling, plastic cap in the both end, pipe clamp;

    6. Surface: Oiled, black painted or varnish, galvanized, 3PE,FBE, or other epoxy coating;

    7. Welded method: Electric Resistance Welding (ERW), Longitudinal Submerged Arc Welding ( LSAW);

    8. Inspection: Hydrostatic testing, ultrasonic testing,eddy current testing,magnetic particle testing,impact testing,hardness testing,etc.;

    9. Application: Petroleum, chemical, electric power, water, construction, pipelines, etc.;

    10. Dwat metòd pwosesis Couture asye:
    1). Forged Steel: the use of a reciprocating hammer impact force or pressure to press the blank change to our desired shap and size of a pressure- processing methods;
    2). Squeeze: It is placed in a sealed steel metal squeeze Jane,put pressure on one end of the metal from the provisions of the extrusion die orifice obtained had the same shape and size of the finished product processing methods,used for the production of non-ferrous metal sheet steel.
    3). Rolling: The steels metal blank by a pair of gap (shapes) of rotation of the roll,the roll due to the compression of the material cross-section is reduced, increasing the length of the press working method;
    4). Pullout steel:is already rolled metal blanks (type, pipe, products, etc.) through the die orifice pull aside to increase the length of the cross section reduction processing methods are mostly used as a cold;

    11. 2PE/3PE preservative and single PE anti-corrosion
    1). 3PE corrosion:three PE pipe anti-corrosion structure: the first layer of epoxy powder (FBE> 100um),the second layer of adhesive (AD) 170 ~ 250um,a third layer of polyethylene (PE) 2.5 ~ 3.7mm.Three materials integration,and with the steel firm to form an excellent coating;
    Diameter range Φ60~Φ1420;
    2).2PE anti-corrosion steel:
    The same story PE pipe corrosion structure, the first layer of adhesive (AD), a second layer of polyethylene (PE), two kinds of integrated material, the thickness of layers with three PE Standard:SY / T0413-2002 buried steel pipeline polyethylene coating technology standards GB/T23257-2009 buried steel pipeline polyethylene coating technology standards;
    3). Single PE anti-corrosion steel:
    Single layer PE is the use of anti-corrosion steel curtain coating process (also known as curtain method), after heating the steel pipe IF rotate top steel container filled with polyethylene powder is formed by leaching polyethylene coating pipe outer wall surface dusted;
    4).Compared with foreign 3PE anticorrosive, single PE anti-corrosion propertie

    12.Coal tar epoxy
    1).Composition:
    The product is formulated with an epoxy resin, coal tar pitch, anti-rust pigments, additives, modified amine. Products with rapid drying, good adhesion, flexibility, and easy two-component packaging and construction. With acid,alkali,salt,water,oil etc.;
    2).Characteristics and Uses:
    ① The paint combination of high mechanical strength epoxy resin adhesive force, erosion and chemical resistance characteristics of asphalt water-resistant, anti-microbial,anti-plant roots,is a high performance anti-corrosion insulation coating,the products are Good chemical resistance, water resistance;
    ② suitable for oil,gas and water pipelines,water,gas,pipelines, refineries,chemical plants, sewage treatment plants and pipeline corrosion of equipment,may be used as antiseptic and mining offshore oil rigs and underwater portion of the ship, corrosion downhole equipment;
    3).Coat corrosion:
    High-density polyethylene jacket anticorrosive structure: the outer surface of the pipe wrapped high density polyethylene material with high mechanical strength and excellent corrosion resistance, can protect the pipe to avoid the transportation, installation and use of the process due to external factors damage caused. Manufacturing outer casing should be added antioxidants, UV stabilizers, and carbon black. Polyethylene outer tube easy to aging, such as open storage and other objects appropriate to tarp covered dumps should be kept away from heat and ignition sources, made after anti-corrosion steel, prohibit exposure, quenched, or polyethylene outer tube easy to crack, the impact of product performance and service life;
    4).The process has been the duty epoxy powder coating using electrostatic spraying. Since epoxy powder Jin Su troubled by adhesion, epoxy powder dip has not been able to promote. Current come with three coconut epoxy powder dip developed special phosphate solution, for the first time to overcome the adherence problem epoxy powder dip process, began to dip epoxy powder of this emerging technology.
    5).Corrosion standards
    FBE epoxy powder preservative execution SY/T0315-2005<steel pipeline single FBE topcoat technical specifications>
    2PE/3PE preservative execution GB/T23257-2009<buried steel pipeline polyethylene outer coating technology standards>
    Anticorrosive surface rust criteria: the outer surface of steel pipe sand-blasting by GB/T8923-2008 requirements of Sa2 1/2 grade steel anchor profile of the surface of 40-100μm;
    6).Application
    Anti-corrosion steel base material including spiral,straight seam pipe,seamless pipe,etc.,are widely used in our long-distance water,petroleum,chemical, natural gas,heating,sewage treatment,water,bridges, steel,marine water piling pipeline engineering;
    7).Advantages
    ① improve the life of the steel pipe;
    ② combination of mechanical strength and plastic pipe corrosion resistance in one;
    ③ outer coating of 2.5mm or more,scratch resistance,bump;
    ④ inner wall of the friction coefficient is small, 0.0081-0.091,reduce energy consumption;
    ⑤ the inner wall to achieve national health standards;
    ⑥ smooth wall is not easy scaling, self-cleaning function;


  • Previous:
  • Next:

  • 1. Dwat Couture tiyo asye spesifikasyon
    2. Tiyo jewometrik tolerans
    Standard atik Kòd kontni SY / T5037 -2000 T9711 -1997 (A tiyo klas) API 5L (43 vèsyon)
    Aplikasyon Gaz, Dlo, kewozin, lè, chofaj, vapè ak lòt jeneral tiyo likid ak tiyo asye Lwil oliv ak gaz endistri tiyo transmisyon Lwil oliv ak gaz endistri tiyo transmisyon
    asye Q195, Q215, Q235 L175 -L483 A, B, X42 ~ X70
    Kantite moun ki kò OD D <508 ± 0.75% D
    D≥508 ± 1.00% D
    D <508 ± 0.75% D
    D≥508 ± 1.00% D
    D <508 ± 0.75% D
    508≤D≤914 -0,25% D ~ + 0.75% D
    D> 914 -0.32% D ~ + 6.35% D
    fen OD D <508 ± 0.75% D oswa ± 2.5 gen minimòm
    D≥508 ± 0.50% D oswa ± 45 gen minimòm
    D≤273.1 -0,40 ~ +1,59
    D> 323,9 -0,79 ~ +2,38
    D≤273.1 -0,40 ~ +1,59
    D> 323,9 -0,79 ~ +2,38
    tolerans WT <508 ± 12.5% ​​t -12,5% t ~ + 12.5% ​​t -12,5% t ~ + 12.5% ​​t
    ≥508 ± 10.0% t L175 ~ L245 -10.0% t ~ + 17,15% t
    L290 ~ L555 -8.0% t ~ + 19.5% t
    Pa pi lwen pase klas B -12,5% t ~ + 17.5% t
    pa pi ba pase X42 -8.0% t ~ + 19.5% t
    oval tib Inner tib fen ranje 100 ± 1% D D> 508 asye nan seri a soti nan 101.6 max OD nan fen a tiyo pa ka pi gwo pase dn a nan 1% D; pi piti OD pase dn a va 1% D D> 508 asye nan seri a soti nan 101.6 max OD nan fen a tiyo pa ka pi gwo pase dn a nan 1% D; pi piti OD pase dn a va 1% D
    degre deviation (regilarite) Pa gen dwa depase 0.2% nan longè a tiyo Pa gen dwa depase 0.2% nan longè a tiyo Pa gen dwa depase 0.2% nan longè a tiyo
    fen tiyo beveling Biseau degre 30 ° -35 ° Blunt edge1.6 ± 0.8 Biseau degre 30 ° -35 ° Blunt kwen 1.59 ± 0.79 Biseau degre 30 ° -35 ° Blunt kwen 1.59 ± 0.79
    Panche 1.6≤D <813 <1.59 <1.59
    UN t≤12.7 0.35t ak pa plis pase 3.0 <1.59 <1.59
    t> 12.7 0.25t 0,1251 ak 3.18 pran valè a minimòm 0,1251 ak 3.18 pran valè a minimòm
    Weld ranfòsman t≤13 ... <3.2
    t> 13 <4.8
    t≤12.7 ... <3.18
    t> 12.7 <4.76
    t≤12.7 ... <3.18
    t> 12.7 <4.76
    analiz Chimik Pran yon echantiyon ki soti nan chak pakèt Pran de echantiyon ki soti nan chak pakèt Pran de echantiyon ki soti nan chak pakèt
    rupture tès Pran yon soude jwenti echantiyon ki soti nan chak pakèt Sèvi Matel: pran yon echantiyon ki soti nan chak SMELTING pakèt
    Espiral jwen: pran yon echantiyon ki soti nan chak SMELTING pakèt
    bou WELD: pa plis pase 50 pran yon sèl echantiyon
    Sèvi Matel: pran yon echantiyon ki soti nan chak SMELTING pakèt
    Espiral jwen: pran yon echantiyon ki soti nan chak SMELTING pakèt
    bou WELD: pa plis pase 50 pran yon sèl echantiyon
    Gide tès pliye Pa gen Chak pakèt pran yon echantiyon tès pozitif ak yon anti-pliye pliye echantiyon,
    bou WELD pa plis pase 50 yo pran yon koub pozitif ak yon echantiyon anti-pliye.
    Chak pakèt pran yon echantiyon tès pozitif ak yon anti-pliye pliye echantiyon,
    bou WELD pa plis pase 50 yo pran yon koub pozitif ak yon echantiyon anti-pliye.
    Frakti severite tès Pa gen Lè kondisyon yo ki kontra, SMELTING pakèt konplèks pran twa echantiyon;
    D≥508, enpak la gout mato chak pakèt SMELTING pran de.
    Lè kondisyon yo ki kontra, SMELTING pakèt konplèks pran twa echantiyon;
    D≥508, enpak la gout mato chak pakèt SMELTING pran de.

    1. Dwat Couture asye pwosesis pwodiksyon tiyo.

     

    2. antikorozyon kouch pwodiksyon pwosesis.

    We have two kinds of packaging:
    1. Packaging suitable for every kind of transport;
    2. According to customer’s requirement to packaging;
  • pwodwi ki gen rapò

    WhatsApp Online Chat !