High Strength Steel Square Pipe
1.Square and rectangular tube, a tube called a square and rectangular tubing, which is the side looks like, and unequal steel. After treatment process is rolled strip made. The general is to strip after unpacking, smooth, curl, tube welding form, and then rolled into the square from the round tube and then cut into the required length.
2.The standard: GB square tube, the standard square tube, inch square tubes, American standard tube, square tube European standard, non-standard square tube.
3.The material: carbon steel (Q195, Q215, Q235, SS400, 20#steel, 45#steel, etc.);low-alloy steel (Q345,16Mn, Q390, ST52-3, etc.).
4.The surface treatment: hot galvanized,electro-galvanized,coated with oil, pickling.
5. Application:Widely used in machinery manufacturing, construction, metallurgical industry, agricultural vehicles, agricultural greenhouses, automotive, railway,highway guardrail, container framework,furniture,decoration as well as steel and other fields.
6.2PE/3PE anti-corrosion and single-layer PE anticorrosive
Three-layer structure of PE pipe corrosion: the first layer of powder epoxy (FBE> 100um）,the second layer of adhesive ( AD) 170～250um, a third layer of polyethylene (PE) 2.5～3.7mm. Three materials integration, and with the steel firm to form an excellent coating.
2).Diameter range of Φ60～Φ14202).2PE anti-corrosion steel pipe:
PE pipe corrosive story structure, the first layer of adhesive (AD), a second layer of polyethylene (PE), the same as the standard blend of two materials, the thickness of layers with three PE: SY/ T0413-2002 buried steel pipeline polyethylene coating technology standards GB/ T23257-2009 buried steel pipeline polyethylene coating technology standards
3).Single PE anti-corrosion steel:
single layer PE is the use of anti-corrosion steel curtain coating process ( also known as curtain method), the steel pipe after rotation frequency heating, steel top is fitted with a polyethylene powder container by pouring dusted steel tube surface polyethylene coating.
4).3PE anticorrosive and external single PE anticorrosive performance comparison
|performance comparison||Outer 3PE FBE epoxy pipe||Outer single polyethylene pipe|
|Sintered outer coating process||Wrapped three-layer structure||Curtain method, curtain coating, single|
|Anti-corrosion structure||The middle layer is adhesive, outer-storey-density polyethylene||Single layer polyethylene, low density polyethylene|
|Adhesion||Strong||Generally, intolerance boiled|
|Performance||Corrosion resistance, wear resistance||Impact general, intolerance scratches|
|Defect||No||Easy to pinholes, leveling uneven apperance|
7. Coal tar epoxy
The product is formulated with an epoxy resin, coal tar pitch, anti-rust pigments, additives, modified amine from. Products with rapid drying, good adhesion, flexibility, and easy two-component packaging and construction. With acid, alkali, salt, water, oil etc.;
2).Characteristics and Uses:
①The paint combination of high mechanical strength epoxy resin adhesive force, erosion and chemical resistance characteristics of asphalt water-resistant, anti-microbial, anti-plant roots, is a high performance anti-corrosion insulation coating, the products are Good chemical resistance, water resistance.
②suitable for oil, gas and water pipelines, water, gas, pipelines, refineries, chemical plants,sewage treatment plants and pipeline corrosion of equipment, may be used as antiseptic and mining offshore oil rigs and underwater portion of the ship,corrosion downhole equipment.
3). Coat corrosion:
High-density polyethylene jacket anticorrosive structure:the outer surface of the pipe wrapped high density polyethylene material with high mechanical strength and excellent corrosion resistance,can protect the pipe to avoid the transportation,installation and use of the process due to external factors damage caused.Manufacturing outer casing should be added antioxidants,UV stabilizers,and carbon black.Polyethylene outer tube easy to aging,such as open storage and other objects appropriate to tarp covered dumps should be kept away from heat and ignition sources,made after anti-corrosion steel,prohibit exposure,quenched,or polyethylene outer tube easy to crack,the impact of product performance and service life.
4). The process has been the duty epoxy powder coating using electrostatic spraying. Since epoxy powder Jin Su troubled by adhesion, epoxy powder dip has not been able to promote. Current come with three coconut epoxy powder dip developed special phosphate solution, for the first time to overcome the adherence problem epoxy powder dip process, began to dip epoxy powder of this emerging technology.
5). corrosion standards:
FBE epoxy powder preservative execution SY/T0315-2005<steel pipeline single FBE topcoat technical specifications>
2PE / 3PE preservative execution GB/T23257-2009<buried steel pipeline polyethylene outer coating technology standards>
Anticorrosive surface rust criteria: the outer surface of steel pipe sand-blasting by GB / T8923-2008 requirements of Sa2 1/2 grade steel anchor profile of the surface of 40-100μm.
Anti-corrosion steel base material including spiral, straight seam pipe, seamless pipe, etc., are widely used in our long-distance water, petroleum, chemical, natural gas, heating, sewage treatment, water, bridges, steel, marine water piling pipeline engineering.
①improve the life of the steel pipe;
②combination of mechanical strength and plastic pipe corrosion resistance in one;
③outer coating of 2.5mm or more,scratch resistance,bump;
④inner wall of the friction coefficient is small, 0.0081-0.091, reduce energy consumption;
⑤the inner walls meet the national health standards;
⑥smooth wall is not easy scaling, self-cleaning function;
1.the low pressure fluid galvanized welded pipe, standard number is GB/T3091-2008. Representative of material Q235A,Q235BQ345B like.Mainly used for conveying water,gas,air,oil and heating hot water or steam,use is limited to general low pressure fluid.
2.low pressure fluid galvanized welded pipe,standard number is GB/T3092-2008. Representative material above.Mainly used for conveying water,gas,air,oil and heating hot water or steam and other general low pressure fluid,the pipe surface using hot-dip galvanizing or cold galvanizing anti-corrosion technology.
3.mine liquid weld pipe,standard number I GB/T14291-2000.Representative of material Q235A,grade B steel is mainly used for mine air pressure,drainage,gas discharge shaft with a straight seam welded square tube.
4.the low pressure fluid with a large diameter welded pipe, standard number GB/T14980-1994.Representative material Q235AB level. Mainly used for conveying water,sewage,gas,air,steam heating and other low pressure fluids.
5.the mechanical structure with stainless steel welded pipe,standard number GB/T12770-1991.Representative material 0Cr13,1Cr17,00Cr19Ni11,1Cr18Ni9,0Cr18Ni11Nb like.Mainly used in machinery,automobiles,bicycles,furniture,hotel and restaurant decoration and other mechanical components and structures.
6.fluid transport stainless steel welded pipe, standard number GB / T12771-1991. Representative material for 0Cr13,0Cr19Ni9,00Cr19Ni11,00Cr17,0Cr18Ni11Nb, 0017Cr17Ni14Mo2 like. Mainly used for conveying low pressure corrosive media.
7.the low pressure delivery spiral square tube (Ministry of Oil Standards) standard number is SY/T5037-2008. Representative material for Q235BQ345B and other steel materials.Mainly for low conveying water,oil,gas,heating and other pipelines.
8.transport flammable and non-flammable fluid pipe,standard number GB / T9711.1 -1997.Representative material for L245-L415,etc.(GB/T9711.2) pipeline steel. Mainly used to transport flammable and non-flammable fluid with low or high pressure pipe,require relatively high.
Square & Rectangle steel pipe production process
We have two kinds of packaging:
1. Packaging suitable for every kind of transport;
2. According to customer’s requirement to packaging;