Big discounting SSAW Welded Steel Pipe – Welded Water Well Steel Pipe
1. The spiral steel: spiral steel coil as raw materials is steel, often warm extrusion, with automatic double- wire submerged arc welding process double- sided spiral welded steel pipe. 2. Standard: GB/T9711.1, API 5L, ASTM A53, ASTM A500, ASTM A672, ASTM A515 etc; 3. Materials: Q235, Q345B, GR.B, X42, X56, ST35, ST52, S235JR, Gr.60, Gr.65, Gr.70, SS400 etc; 4. Specification: OD：219.1mm-2032mm； WT： 4mm – 40mm； Length： 6m – 18m； 5. End: plastic cap in the both end, pipe clamp...
Big discounting SSAW Welded Steel Pipe – Welded Water Well Steel Pipe Detail:
2. Standard: GB/T9711.1, API 5L, ASTM A53, ASTM A500, ASTM A672, ASTM A515 etc;
3. Materials: Q235, Q345B, GR.B, X42, X56, ST35, ST52, S235JR, Gr.60, Gr.65, Gr.70, SS400 etc;
WT： 4mm – 40mm；
Length： 6m – 18m；
9. Spiral steel pipe pile principles and requirement
1). The spiral pipe stacking principle requires that at palletizing firm to ensure the safety of the premise, to do according to species, size palletizing, different varieties of materials to be separately palletizing to prevent muddy and mutual erosion;
2). Do not store the erosion of steel have items in place around the spiral steel pipe pile;
3). Spiral Pipe pile bottom should elevate, firm, smooth, damp or prevent material deformation;
4) The same material has separately by stacking storage;
5). The open dumps spiral pipe steel, the following must have wood or stone pad, pile surface is slightly inclined to facilitate drainage, and pay attention to the material placed flat to prevent the causing bending deformation;
6). spiral steel stacking height, artificial homework does not exceed 1.2m, mechanical homework does not exceed 1.5m, pile width not exceeding 2.5m;
7) It should leave some passages between the stacks and stacks 7. Check road is generally 0.5m, of access depending on the size of the material and transport machinery, generally of 1.5 ~ 2.0m;
8). open dumps angles and channels should stoop to put that mouth down, I-beam shall stand up, I can not groove surface of steel up to avoid stagnant water rust;
9). pile bottom booster, if the warehouse is sunny concrete floor, can elevate 0.1m; if the mud, to be boosted 0.2 ~ 0.5m. If it is open space, concrete floor booster 0.3 ~ 0.5m, mud face booster 0.5 ~ 0.7m.
10. 2PE/ 3PE anti-corrosion and single-layer PE anticorrosive
Three-layer structure of PE pipe corrosion: the first layer of powder epoxy (FBE> 100um），the second layer of adhesive ( AD) 170～250um, a third layer of polyethylene (PE) 2.5～3.7mm. Three materials integration, and with the steel firm to form an excellent coating.
Diameter range of Φ60～Φ14202) 2PE anti-corrosion steel pipe：
PE pipe corrosive story structure, the first layer of adhesive (AD), a second layer of polyethylene (PE), the same as the standard blend of two materials, the thickness of layers with three PE: SY/ T0413-2002 buried steel pipeline polyethylene coating technology standards GB/ T23257-2009 buried steel pipeline polyethylene coating technology standards3) Single PE anti-corrosion steel:
single layer PE is the use of anti-corrosion steel curtain coating process ( also known as curtain method), the steel pipe after rotation frequency heating, steel top is fitted with a polyethylene powder container by pouring dusted steel tube surface polyethylene coating.
4) 3PE anticorrosive and external single PE anticorrosive performance comparison
|performance comparison||Outer 3PE FBE epoxy pipe||Outer single polyethylene pipe|
|Sintered outer coating process||Wrapped three-layer structure||Curtain method, curtain coating, single|
|Anti-corrosion structure||The middle layer is adhesive, outer-storey-density polyethylene||Single layer polyethylene, low density polyethylene|
|Adhesion||Strong||Generally, intolerance boiled|
|Performance||Corrosion resistance, wear resistance||Impact general, intolerance scratches|
|Defect||No||Easy to pinholes, leveling uneven apperance|
11. Coal tar epoxy
The product is formulated with an epoxy resin, coal tar pitch, anti-rust pigments, additives, modified amine from. Products with rapid drying, good adhesion, flexibility, and easy two-component packaging and construction. With acid, alkali, salt, water, oil etc.
①The paint combination of high mechanical strength epoxy resin adhesive force, erosion and chemical resistance characteristics of asphalt water-resistant, anti-microbial, anti-plant roots, is a high performance anti-corrosion insulation coating, the products are Good chemical resistance, water resistance.
②suitable for oil, gas and water pipelines, water, gas, pipelines, refineries, chemical plants, sewage treatment plants and pipeline corrosion of equipment, may be used as antiseptic and mining offshore oil rigs and underwater portion of the ship , corrosion downhole equipment.
4) The process has been the duty epoxy powder coating using electrostatic spraying. Since epoxy powder Jin Su troubled by adhesion, epoxy powder dip has not been able to promote. Current come with three coconut epoxy powder dip developed special phosphate solution, for the first time to overcome the adherence problem epoxy powder dip process, began to dip epoxy powder of this emerging technology.
FBE epoxy powder preservative execution SY / T0315-2005 《steel pipeline single FBE topcoat technical specifications》
①improve the life of the steel pipe；
⑤the inner walls meet the national health standards；
Product detail pictures:
Related Product Guide:
About Stainless Steel Pipes
Steel Pipes: Benefits and Practical Applications
We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for Big discounting SSAW Welded Steel Pipe – Welded Water Well Steel Pipe, The product will supply to all over the world, such as: Birmingham , Malta , Vietnam , We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, let us work together to get success.
By Adam from Turkmenistan - 2015.12.10 19:03
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Maria from Philippines - 2015.11.22 12:28